HomeMaterials

FDM / MSLA

3D printing materials

We also print everyday materials for appearance models and functional parts. We confirm the exact grade and colour for each job and assess engineering composites for more demanding applications.

01 / FDM · MSLA

From everyday plastics to engineering composites

TPU

Flexible feet, bumpers, protective caps and grommets. Hardness is selected for the application.

Grade and colour confirmed per jobEnquire about this material

ASA / ABS

Functional housings and mechanical parts. We assess ASA for outdoor parts according to the conditions of use.

Grade and colour confirmed per jobEnquire about this material

MSLA resins

Detailed appearance samples, small components and models. We select the resin for the application.

Grade and colour confirmed per jobEnquire about this material

PC-CF & PC Blend CF

For fixtures and housings where stiffness and dimensional stability matter. The exact grade is chosen by load, temperature and geometry.

Engineering composite · assessed for your partEnquire about this material

PA11-CF

For mechanically demanding prototypes and fixtures. We assess moisture effects, dimensional change and long-term loading.

Engineering composite · assessed for your partEnquire about this material

PA6-CF & PA12-CF

For production aids and mechanical prototypes. Each grade is processed according to its base polymer and fibre content.

Engineering composite · assessed for your partEnquire about this material

PET-CF

For dimensionally demanding fixtures and brackets. Suitability is checked against material data and part requirements.

Engineering composite · assessed for your partEnquire about this material

Glass-fibre-filled polymers

Glass fibre widens the options for fixtures, housings and development parts. The base polymer and functional requirements decide.

Engineering composite · assessed for your partEnquire about this material
Materials for laser processing ↗

02 / Selection by application

What must the part handle?

Choose the main requirement. We’ll provide questions to help assess the material and manufacturing process.

Browse materials
Stiffness and precise fit

Specify the load, allowable deflection and dimensions that determine fit. Mark them on a drawing if possible.

For example, a locating fixture or a sensor bracket.

Use in project inquiry
Operating temperature

Specify normal and peak temperatures, exposure time and whether the part carries a load while hot.

For example, an enclosure or bracket near a heat source.

Use in project inquiry
Humidity and chemicals

Describe the environment, substances that contact the part and the frequency or duration of exposure.

For example, an enclosure in a humid area or a fixture exposed to cleaning agents.

Use in project inquiry
Repeated loading

Describe the type of load, expected number of cycles and the area that bends or wears the most.

For example, a latch or a fixture used for repeated assembly.

Use in project inquiry

03 / Engineering materials

How we assess materials

We start with the part’s application and a specific material grade. Filament properties and fibre orientation alone do not guarantee the properties of a printed part.

  1. 01

    Load and direction

    What forces act on the part, and in which direction? For FDM we assess layer orientation and mounting.

  2. 02

    Temperature and environment

    Specify operating temperature, humidity, chemicals and exposure time. Suitability of the chosen material needs to be verified.

  3. 03

    Dimensions and contact

    Identify critical holes, mating surfaces and contact points. Fibre filling can affect surface and part behaviour.

  4. 04

    Manufacturing and inspection

    A specific grade requires suitable equipment, nozzle, drying and profile. Critical dimensions or function are checked to an agreed plan.

Not sure which material to choose?

Describe the application and dimensions. We can assess the exact material together.

Describe the part and its use ↗

Have a drawing, a model or an idea?

Start a project ↗