HomeProjects and samples

ESMAVIK

Projects and samples

Production fixtures, UAV parts and test samples from our workshop. Each project shows the stage it has reached.

Production fixtures / Custom engineering

Custom production fixtures

Locating inserts, sensor mounts and assembly aids designed around the part and the workstation. We start with one prototype and agree in advance what to check on it.

Brief us on a fixture
Grey printed slotted arm and steel pin above a yellow crank disc.
Visualisation of the 3D model

What we work through before printing

Grey printed slotted arm and steel pin above a yellow crank disc.

ESMAVIK / 053 Visualisation of the 3D model

Converting rotation to linear motion

A pin on the disc runs in a transverse slot. Side guides keep the arm moving in a straight line. In CAD, we checked the ideal pin path through a full revolution.

What to check on the first part

After assembly, run through the full stroke and check for binding and play.

Two grey printed mould halves with cavities, locating pins and channels.

ESMAVIK / 105 Visualisation of the 3D model

Two-part mould with locating pins

Pins align the two halves. The wider groove feeds the mixture and the narrower one is intended to vent air. We propose a PETG prototype for the first fit check at room temperature.

What to check on the first part

Check how the halves seat, how the pins fit and whether the grooves are open.

What to send us

  1. A workstation photo, sketch or STEP model, plus a description of the operation.
  2. Contact surfaces, mounting method and the dimension that matters.
  3. Quantity and the criterion the prototype needs to meet.
Brief us on a fixture

In-house development / UAV

Twin-EDF flying wing

A design concept for an unmanned flying wing with two electric ducted fans. The study shows the proposed configurations for forward flight and nose-up hover.

Design concept: forward flight and nose-up hover
Design concept: forward flight and nose-up hover

Development status

  1. 01

    Design concept

    Flying wing study with two electric ducted fans for proposed forward flight and hover.

  2. 02

    Passive sample printed

    We printed the two-piece duct in PLA and checked how the flanges mated during assembly.

  3. 03

    Tests ahead

    Airflow, powered operation and flight capability still require testing.

How we checked the duct

From development: two-part intake duct sample

Sample specifications

Nominal throat diameter in CAD
64 mm
Duct sample parts
2
Print process and material
FDM / PLA
  1. 01

    Parametric design

    The straight section and flared inlet share a flange interface. Dimensions and hole spacing can change without redrawing the model.

  2. 02

    Preparation and 3D printing

    We exported the parts as STEP and STL. The sample was printed in PLA.

  3. 03

    Assembly check

    The printed flanges were checked for fit. The next phase will focus on a separate propulsion test module.

Engineering and 3D printing for UAVs

We review covers, access panels, sensor mounts, adapters and airframe sections against your model or drawing. We start with a prototype for fit checks and testing.

Discuss engineering or printing

From the ESMAVIK workshop

Wall of prints

Small samples that show specific engineering tasks: seating, fit and positional adjustment.

Printed and assembled

ESM–00Printed and assembled

UAV intake duct: the flanges fit

We designed two parts in parametric CAD and printed them in PLA. Assembly confirmed that the flanges seated properly.

The sample confirmed the parts assemble correctly. Powered tests are the next development stage.Explore the UAV project ↗

Ready for a test print

ESM–01Ready for a test print

Fit plate and pin

Five holes help identify the clearance at which the pin slides in by hand.

Physical fit is still to be checked.
ESM–02Ready for a test print

Adjustable sensor mount

Two slots allow position adjustment. The STL and STEP exports have been checked digitally.

After printing, we will check bolt passage, adjustment and base seating.

Have a drawing, a model or an idea?

Start a project ↗